Before operation, wear tight protective clothing with tight cuffs, and do not open the bottom of the coat. Do not wear, take off or change clothes beside the operating machine tool, or wrap them around the body to prevent the machine from being twisted. Must wear a helmet, braid should be put into the hat, not wearing skirts, slippers.

Shearing machine operators must be familiar with the main structure, performance and use of shearing machine.

Plate shears are suitable for cutting all kinds of steel plate, copper plate, aluminum plate and non-metallic material plate whose thickness is rated as the machine tool, and must be no hard mark, welding slag, slag, welding seam material, not allowed to exceed the thickness.

The use of plate shearing machine: according to the thickness of the material to be cut, adjust the gap of the blade; Adjust the die or fixture according to the width of the material to be cut; Before the operation of the shearing machine, make 1-3 empty stroke first, and shear work can be implemented after normal.

If the machine is found to run abnormally, the power should be cut off immediately and stop for inspection.

When adjusting the machine, the power must be cut off. When moving the workpiece, pay attention to the safety of the hand.

Each part of the plate shearing machine should always be lubricated, and each shift should be filled with lubricating oil by the operator once, and the rolling bearing part should be filled with lubricating oil by the mechanic once every six months.